Natural stone is meant to last a lifetime — and with a few easy habits, it will look the way it did on install day for years. Here's the care routine we share with every client at the final walk-through.
Everyday cleaning
- Wipe with warm water and a few drops of mild dish soap, or a cleaner labeled safe for natural stone.
- Use a soft cloth or non-scratch sponge, then dry with a microfiber towel to avoid water spots.
- Skip vinegar, lemon, bleach, ammonia and most all-purpose sprays. Acids and harsh chemicals can dull the polish and wear down the sealer.
- Avoid abrasive powders and scouring pads.
Wipe spills quickly
Sealed stone gives you time — but not unlimited time. Blot (don't rub) oil, wine, coffee, juice and tomato sauce as soon as you can. On marble especially, acidic foods like citrus, vinegar and wine can leave a dull mark called an etch. Etching isn't a stain; it's a light change to the surface finish, and many marble owners embrace it as part of the stone's patina.
Sealing: how and when
Granite, marble and quartzite are natural and slightly porous, so a penetrating sealer helps them resist stains. A quick at-home test tells you when it's time:
- Put a few drops of water on the counter in a high-use area, like next to the sink.
- Wait 10–15 minutes.
- If the water still beads up, you're fine. If the stone darkens where the water sat, it's time to reseal.
Resealing is usually a simple wipe-on, wipe-off job with a quality stone sealer — follow the product's instructions. How often you need it depends on the stone and how much use the counter gets; some dense granites rarely need it, while lighter marbles and quartzites benefit from more frequent attention. We'll tell you what to expect for the exact slab you choose.
Quartz is the exception: it's non-porous and never needs sealing.
Heat, knives and heavy items
- Use trivets under hot pans, slow cookers and air fryers. Granite handles heat well, but sudden temperature changes and the resin in quartz don't mix.
- Use a cutting board. Stone won't mind your knife — but your knife will mind the stone.
- Don't stand or sit on overhangs and unsupported edges, and take care not to drop heavy pots on edges and corners, where chips are most likely.
Removing common stains
For an oil-based stain on sealed granite, a poultice (a paste of baking soda and water, covered and left to dry for a day) can draw it out. For anything stubborn — or for any stain on marble or onyx — give us a call before experimenting. The wrong product can do more harm than the stain.
Quick reference by material
| Material | Sealing | Watch out for |
|---|---|---|
| Granite | Periodically | Oils left to sit on light colors |
| Marble | More often | Acids (lemon, vinegar, wine) — etching |
| Quartzite | Periodically | Same as granite; test light slabs |
| Quartz | Never | Direct heat; strong solvents |
| Soapstone | Not required | Light scratches (buff out; optional mineral oil) |
Care guidance here is general. Characteristics vary by slab and finish — we'll confirm specifics for your stone.
Frequently asked questions
How often should granite countertops be sealed?
It depends on the stone and how much use it gets. Do the water test: if water darkens the stone within 10–15 minutes, it is time to reseal.
Can I clean marble with vinegar?
No. Vinegar and other acids can etch marble and dull its finish. Use warm water with mild dish soap or a stone-safe cleaner.
Does quartz need sealing?
No. Quartz is non-porous and never needs to be sealed.



